Table of Contents
Advertisement
Installation and setup
DP IN 1
DP IN 2
Image 2–3
To switch between different image sources, see
Power on the display system
1.
Press/Turn the jog dial to activate your display.
2.
Switch on the workstations connected to your display.
Your display will be running in a basic video mode at a default refresh rate when first time starting up.
Install the MXRT driver and Intuitive Workflow Tools
When using a Barco MXRT display controller, install the MXRT driver and Intuitive Workflow Tools on the
connected workstation. Barco's Intuitive Workflow Tools are designed to increase visibility of subtle details,
improve focus during reading sessions, and accelerate workflow.
1.
Download the latest MXRT driver and Intuitive Workflow Tools from www.barco.com/mxrt.
2.
Install the MXRT driver and Intuitive Workflow Tools as described in the Barco "Display Controller and
Intuitive Workflow Tools" user guide on the included documentation CD, or at www.barco.com/support.
2.3 Dual workstation setup with KVM switch
About
In this setup, the display is connected to two different workstations, each with one DisplayPort cable. When
connecting a USB cable from your display to each of the two workstations, you can control both workstations
with a single keyboard and mouse connected to the display. Switching the video and control signals between
the two workstations is done with the KVM switch operated via the OSD menu.
14
R5915130 /05
Nio 2MP / 3MP LED Display
USB
SERVICE
DP OUT
DOWN
USB
USB
UP 1
UP 2
DC IN
"Image source", page 34
for more information.
Advertisement
Table of Contents
