Table of Contents
Advertisement
Daily operation
3.5 OSD menu access and use
About the OSD menu
The OSD menu allows you to configure different settings to make your Nio 2MP / 3MP LED Display fit your
needs within your working environment. Also, you can retrieve general information about your display and its
current configuration settings through the OSD menu.
To access the OSD menu
1. Press/Turn the jog dial to activate the shortcut bar.
2. Turn the jog dial and select the OSD menu icon (
3. Press the jog dial to enter the OSD menu.
To navigate through the OSD menus
•
Turn the jog dial left/right to scroll through the (sub)menus, to change values or to make selections.
•
Press the jog dial to go into a submenu or confirm adjustments and selections.
•
Press and hold the jog dial for approximately 3 seconds to switch off the display while no OSD menu is on
the screen or to abort DICOM compliance check/DICOM calibration.
•
Turn the jog dial on Back/Exist and press to exit the (sub)menu.
24
R5915130 /05
Nio 2MP / 3MP LED Display
).
Advertisement
Table of Contents
