System Info; Calibration Status; Maximum Luminance Demo - Barco Nio MDNC-3521 SNES User Manual

2mp / 3mp led display
Table of Contents

Advertisement

Advanced operation
2.
Navigate to the Image Settings menu.
3.
Enter the Grayscale Conversion submenu.
4.
Select a desired color conversion mode and confirm.

4.19 System info

About system info
Your display serial number, native resolution, firmware version, etc. are available in a dedicated submenu of
the OSD menu.
To retrieve info. about your display
1.
Bring up the OSD main menu.
2.
Navigate to the System Info menu to make the information visible on the screen.

4.20 Calibration status

About calibration status
The calibration status menu not only provides the current calibration status of the display (display function,
luminance, ALC, etc.) but also provides a shortcut to Display Function, Luminance Target, Color Temperature/
White Tint, Reading Room and Ambient Light Compensation submenus.
To retrieve/set the calibration status of your display
1.
Bring up the OSD main menu.
2.
Navigate to the Calibration Status menu to display the calibration status.
3.
Enter an accessible submenu.
4.
Set the calibration status as desired and confirm.

4.21 Maximum luminance demo

About maximum luminance demo
The maximum luminance demo sets the luminance of the LCD panel to its maximum value for 60 seconds, or
until the demo is manually cancelled. The actually measured luminance is shown on-screen.
While activated, the maximum luminance demo disables the display's backlight stabilizer and sets
the Color Temperature/White Tint to Native White. When the maximum luminance demo is
cancelled, the original settings are restored.
To activate the maximum luminance demo
1.
Bring up the OSD main menu.
2.
Navigate to Service Mode submenu.
3.
Enter the keycode: 5-0-4-0 to bring up the service mode menu.
4.
Navigate to the Maximum Luminance Demonstration submenu.
5.
Select Enabled to activate the maximum luminance demonstration.
6.
Select Disabled to manually cancel the maximum luminance demonstration, or wait for 60 seconds after
which the demonstration is automatically cancelled.
36
R5915130 /05
Nio 2MP / 3MP LED Display

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nio mdnc-3521 spesNio mdnc-2521 snesNio mdnc-2521 spes

Table of Contents