The Display Console - Sunny Health & Fitness PEGASUS SF-T722054 User Manual

Connected folding treadmill
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

THE DISPLAY CONSOLE

DISPLAYS
TIME /STEPS display:
Displays the running time.
Displays the running time from 0:00-99:59, when the time reaches 99:59, the treadmill will gradually slow down
to stop and the speed window will display "End". After completely stopping for 5 seconds, the treadmill will go
into standby state.
In distance and calorie countdown mode: time from 0:00-99:59, when time reaches 99:59, the value will be
cleared to 0 and treadmill will keep on running.
In the time countdown mode: display counts down from the set time to zero. When the countdown reaches
0:00, the treadmill will gradually slow down to stop and after completely stopping for 5 seconds, the treadmill
will go into standby state.
When running, the window will display the number of steps, range from 0 to 9999 steps.
DIS. (DISTANCE) display:
Displays the accumulated distance from 0.00-99.9. When it reaches the maximum 99.9, the value will be
cleared, and the treadmill will keep on running.
When in countdown mode, the display counts down from the set value to zero. When the countdown reaches
zero, the treadmill will gradually slow down to stop and after completely stopping for 5 seconds, the treadmill
will go into standby state.
CAL. (CALORIE) display:
Displays the calorie consumption value of the exercise. Count from 0.0-999 KCAL, when it reaches the
maximum 999 KCAL, the value will be cleared, and treadmill will keep on running.
When in the countdown mode, the display counts down from the set value to zero. When the countdown
reaches zero, the treadmill will gradually slow down to stop and after completely stopping for 5 seconds, the
treadmill will go into standby state.
SPEED display: Displays the current running speed.
Displays "H-1, H-2, H-3" in mode setting state.
Displays "P01-...P12" in program selection state.
Displays "U01-...U03" in the user program selection state.
Displays current speed value in running state.
Speed display ranges from: 0.6-7.5 MPH (metric 1.0-12.0 KM/H).
PUL. (PULSE) display:
Displays pulse value. When exercising, hold on to the pulse sensors with both hands, the system can
automatically detect the heartbeat rate of the user and display the value in this window.
Pulse display ranges from: 50-200 times/min.
(This data is for reference only and should not be considered as medical data.)
12

Advertisement

Table of Contents
loading

Table of Contents