Table of Contents
Advertisement
DISPLAY
SPEED: Displays current speed (range 0.5-7.0 MPH). When in setting mode, the window displays
H-1, H-2, H-3.
TIME: Displays the exercise time from 0:00-99:59 MINS. If the time reaches 99:59, the treadmill will
stop smoothly, show "End" on display and enter standby mode after 5 seconds. When in countdown
mode, it will count from the setting time to 0:00. When the countdown reaches to 0:00, the treadmill
will also stop smoothly, show "End" on display and enter standby mode after 5 seconds.
DISTANCE: Displays the distance traveled (range 0.00-99.9 MILES). When the meter reaches 99.9,
it will reset to 0.00 and begin counting again from 0.0. When in countdown mode, it will count down
from the distance you set to 0.00. When it reaches 0.00, the treadmill will stop smoothly and display
"End", then enter standby mode after 5 seconds.
CALORIES: Displays user's calories burned (range 0.0-999 calories). After reaching 999, it will
start again from 0. In countdown mode, it will count from the number of calories you set to 0. When
it reaches 0, the treadmill will stop smoothly and show "End", then enter standby mode after 5
seconds.
PULSE: Displays runner's heartbeats per minute (50-200 BPM). Runner must place both hands
over the pulse sensors located on the handlebars for the system to calculate the runner's pulse.
(This data is for reference only and cannot be used as medical data.)
PROGRAMS
TIME (MIN:SECOND) 0:00
SPEED (MPH)
DISTANCES (MILE)
CALORIE (KCAL)
PULSE (BPM)
THE DISPLAY CONSOLE
Initial Default Value
15:00
0.5
0.5
0
1.0
0
50
P
N/A
Set Range
Display Range
5:00-99:00
0:00－99:59
0.5-7.0
0.5-99.9
0.00－99.9
10-999
N/A
18
0.5-7.0
0.0－999
50-200
Advertisement
Table of Contents
