Summary of Contents for Sunny Health & Fitness SF-T7610
Page 1
EASY ASSEMBLY FOLDING TREADMILL SF-T7610 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions.Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INSTRUCTION When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. DANGER – To reduce the risk of electrical shock: 1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING –...
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.
IMPORTANT OPERATING INSTRUCTION 1. Insert the power plug directly into the socket. 2. Read the manual before operating the equipment. 3. Changes in speed do not occur immediately. Set your desired speed using the adjustment keys on the main console. The speed will increase gradually. 4.
PARTS LIST Description Specification Qty. Description Specification Qty. Base Frame Rubber Cushion Base Support Tube EVA Cushion 2 Main Frame Tube Plug Handrail Connecting Fixed Block Bracket Handrail Bracket Cushion Running Board Support Inner Cap Tube Front Roller Safety Key Rear Roller Rubber Cushion Spanner w/ Screw Driver...
ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 1: Note: We recommend having two people to do the assembly. Open the carton box, take out the contents, and place the Main Frame (No.
Page 9
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 3: To avoid any possible injury, please hold on to the Main Frame (No. A03) at position “F”...
Page 10
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 5: Insert Lock Knob (No. B09). Secure the Base Frame (No. A01) to Main Frame (No.
MAINTENANCE & CARE General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis. Clean both sides of the Running Belt (No. C13) to prevent dust from accumulating underneath. Keep your running shoes clean so that dirt from your shoes does not wear out the Running Board (No.
LUBRICATING THE TREADMILL IMPORTANT NOTE: You will need to lubricate your treadmill before the first use. RUNNING BELTS & TREADMILL LUBRICANT: Lubricating the Running Board (No. D12) and Running Belt (No. C13) is essential as the friction between the two affects the life span and function of the treadmill. It is suggested that the Running Board (No.
FOLDING INSTRUCTIONS FOLD UP: Loosen the Lock Knob (No. B09) counterclockwise and pull it out. Fold up the Main Frame (No. A03). Note: Remember where you keep the Lock Knob (No. B09) after you pull it out. You will need it when you unfold the treadmill.
Page 14
UNFOLD: Note: Before lowering the Main Frame (No. A03), ensure that the space directly underneath is clear of any objects. To avoid any possible injury, please hold the Main Frame (No. A03) at position “F” before you pull the Locking Pin (No. C25). Once the Main Frame (No.
HOW TO MOVE THE MACHINE Before attempting to move the treadmill, make sure that it has been properly folded. Unplug the power cord. To tilt, start by placing one hand at position “P” to support the top end of the treadmill. Next, place one foot at position “K”...
HOW TO USE SAFETY KEY Insert the Safety Key (No. C32) into the magnetic area of the Console Display (No. B) and clip to your clothes. Note: In an emergency, pull out the Safety Key (No. C32), and the treadmill will stop.
IMPORTANT ELECTRICAL INFORMATION WARNING: This treadmill requires a power source of 8 amps (100-120 V) in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before plugging the equipment. Any power source above or below this level could cause significant damage to the equipment and or user.
THE DISPLAY CONSOLE DISPLAY SPEED: Displays current speed (range 0.5-6.5MPH). When in setting mode, the window displays H-1, H-2, H-3. TIME: Displays running time. If the time reaches 99:59, the treadmill will stop smoothly and display “End” and will enter standby mode after 5 seconds. When in countdown mode, it will count from the setting time to 0:00.
FUNCTION KEYS START: To start the treadmill, insert the magnet end of the safety key into the computer console then press the START button. This treadmill requires the Safety Key in order to start. 0.5 MPH is the default start speed. STOP: This button can PAUSE and STOP.
Page 20
TREADMILL FUNCTIONS SAFETY LOCK FUNCTION: Remove the Safety Key (No. C32) from the computer console while the treadmill is running, and the treadmill will stop immediately. Once the treadmill reaches a full stop, the display will show “- - -” and the buzzer will beep 3 times.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SUGGESTED ACTION Not plugged in. Plug cord into outlet. Treadmill will not start Safety Key not inserted. Insert Safety Key. Not calibrated correctly. Re-calibrate speed setting. Running speed inaccurate Speed set in the wrong Change setting to proper units of measurement.
Page 22
Check motor wires to see if the motor is connected. If the The motor wire is not wire has been punctured or E06: Motor Abnormality connected, or the motor is damaged, you will need to damaged. replace it. If the problem is not rectified, you may need to replace the motor.