Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sunny Health & Fitness SF-T7632
Summary of Contents for Sunny Health & Fitness SF-T7632
- Page 1 SPACE SAVING FOLDING TREADMILL SF-T7632 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
-
Page 2: Important Safety Instruction
IMPORTANT SAFETY INSTRUCTION When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. DANGER – To reduce the risk of electrical shock: 1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING –... -
Page 3: Important Safety Information
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. -
Page 4: Important Note
IMPORTANT OPERATING INSTRUCTIONS 1. Insert the power plug directly into the socket. 2. Read the manual before operating the treadmill. 3. Changes in speed do not occur immediately. Set your desired speed using the adjustment keys on the main console. The speed will increase gradually. 4. -
Page 5: Exploded Diagram
EXPLODED DIAGRAM... -
Page 6: Parts List
PARTS LIST Description Spec. Description Spec. Base Frame Locking Pin Main Frame Rubber Cushion Console Bracket Safety Key Handlebar Motor Frame Decoration Ring Adjustable Frame Console Display Base Support Tube L/R Control Board Running Board Strengthen Keyboard Tube Front Roller Top Signal Wire Rear Roller Middle Signal Wire... -
Page 7: Hardware Package
Description Spec. Description Spec. Bolt M6*25 Φ8 Arc Washer Bolt M8*60 Φ8 Spring Washer Bolt M6*46 Φ8 Flat Washer C Bolt M8*48 Bolt M8*48 HARDWARE PACKAGE #E05 M8*15 2PCS #B03 S=13, 14, 15 1PC #E13 ST4.2*12 8PCS #B04 S5 1PC #E20 Φ8 6PCS #E02 M8 2PCS #E24 M8*48 2PCS... - Page 8 ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877- 907- 8669). STEP 1: NOTE: We recommend having two people do the assembly. Open the carton box and remove contents. Place the Main Frame (No.
- Page 9 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877- 907- 8669). STEP 3: NOTE: To avoid any possible injury, please hold on the Main Frame (No. A02) at position “F”...
- Page 10 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877- 907- 8669). STEP 5: Attach the Console Bracket (No. A03) to the Base Frame (No. A01) with 2 Bolts (No. E24).
- Page 11 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877- 907- 8669). STEP 7: Insert Lock Knob (No. B09). Secure the Base Frame (No. A01) to Main Frame (No. A02) by turning Lock Knob (No.
-
Page 12: Maintenance And Care
MAINTENANCE & CARE General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis. Clean both sides of the Running Belt (No. C13) to prevent dust from accumulating underneath. Keep your running shoes clean so that dirt from your shoes does not wear the Running Board (No. -
Page 13: Lubricating The Treadmill
LUBRICATING THE TREADMILL *IMPORTANT NOTE: You will need to lubricate your treadmill before the first use. RUNNING BELT & TREADMILL LUBRICANT: Lubricating the Running Board (No. D12) and Running Belt (No. C13) is essential as the friction affects the life span and operations of the treadmill. Inspect the Running Board (No. D12) and Running Belt (No. -
Page 14: Folding Instructions
FOLDING INSTRUCTIONS FOLDING: Loosen the Lock Knob (No. B09) counter-clockwise and pull it out. Fold up the Main Frame (No. A02). NOTE: Remember where you keep the Lock Knob (No. B09) after you pull it out. You will need it when you unfold the treadmill. Pull out the Locking Pin (No. - Page 15 UNFOLDING: NOTE: Before lowering the Main Frame (No. A02), ensure that the space directly underneath is clear of any objects. To avoid any possible injury, please hold on the Main Frame (No. A02) at position “F” before you pull the Locking Pin (No. C25).
-
Page 16: How To Move The Treadmill
HOW TO MOVE THE TREADMILL Before attempting to move the treadmill, please make sure that it has been properly folded. Unplug the power cord. To tilt, start by placing one hand at position “P” to support the top end of the treadmill. Next, place one foot at position “K”... -
Page 17: How To Use Safety Key
HOW TO USE SAFETY KEY Secure Base Frame (No. A01) into Main Frame (No. A02) by inserting Lock Knob (No. B09) and turning clockwise until tight. Insert the Safety Key (No. C27) into the magnetic area of the Console Display (No. D01) and clip to your clothes. -
Page 18: Important Electrical Information
IMPORTANT ELECTRICAL INFORMATION WARNING: This treadmill requires a power source of 8 amps (100-120 V) in order to properly operate. For your safety, as well as the safety of others, verify that the power source is correct before plugging in the equipment. Any power source above or below this level could cause significant damage to the equipment and/or user. -
Page 19: The Display Console
THE DISPLAY CONSOLE DISPLAY SPEED: Displays current speed (range 0.5-7.0 MPH). When in setting mode, the window displays H-1, H-2, H-3. TIME: Displays the running time. Displays the exercise time from 0:00-99:59 MINS. If the time reaches 99:59, the treadmill will stop smoothly and display “End” and will enter standby mode after 5 seconds. -
Page 20: Function Keys
FUNCTION KEYS START: To start the treadmill, insert the magnetic end of the Safety Key (No. C27) into the computer console then press the START button. This treadmill requires the Safety Key (No. C27) in order to start at default setting speed 0.5 MPH. STOP: This button can PAUSE and STOP the treadmill. - Page 21 TREADMILL FUNCTIONS SAFETY LOCK FUNCTION: Removing the Safety Key (No. C27) from the console while the treadmill is running, and the treadmill will stop immediately. Once the treadmill reaches a full stop, the display will show “- - -” and the treadmill will beep 3 times.
-
Page 22: Exercise Instructions
EXERCISE INSTRUCTIONS GETTING STARTED: Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the treadmill properly. Be aware of your body’s signals. -
Page 23: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SUGGESTED ACTION Not plugged in. Plug power cord into outlet. Treadmill will not start. Safety Key (No. C27) is Insert Safety Key (No. C27). not inserted. Running belt tension is not Tighten the left and right Running belt not centered. - Page 24 Check motor wires to see if the motor is connected. If the The motor wire is not wire has been punctured or E06: Motor Abnormality. connected, or the motor is damaged, you will need to damaged. replace it. If the problem is not rectified, you may need to replace the motor.