Table of Contents
Advertisement
Quick Links
INTERACTIVE SLIM AUTO INCLINE
TREADMILL WITH BLUETOOTH
SF-T722022
USER MANUAL
IMPORTANT! Please retain owner's manual for maintenance and adjustment instructions.
Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE
CONTACTED US: support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).
Advertisement
Table of Contents
Related Manuals for Sunny Health & Fitness SF-T722022
Summary of Contents for Sunny Health & Fitness SF-T722022
- Page 1 INTERACTIVE SLIM AUTO INCLINE TREADMILL WITH BLUETOOTH SF-T722022 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).
-
Page 2: Important Safety Instruction
IMPORTANT SAFETY INSTRUCTION When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using (this appliance). DANGER –To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning. -
Page 3: Important Safety Information
IC Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. -
Page 4: Important Note
IMPORTANT OPERATING INSTRUCTIONS 1. Insert the power plug directly into the socket. 2. Read the manual before operating the equipment. 3. Changes in speed do not occur immediately. Set your desired speed using the adjustment keys on the main console. The speed will increase gradually. 4. -
Page 5: Pre-Assembly Check List
PRE-ASSEMBLY CHECK LIST Before you start to assemble, please make sure all parts are included. Description Spec. Qty. Treadmill Safety Key Power Wire Bottle Holder Lubricant Oil Manual Thank You Card Hardware Package... -
Page 6: Hardware Package
HARDWARE PACKAGE Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: The model number (found on cover of manual) The product name (found on cover of manual) ... - Page 7 ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 1: Open the carton box and remove contents. Place the Main Frame (No. A) on level ground, ensure that you have a work area that is clean and has adequate space.
- Page 8 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 3: Support the Left & Right Upright Tubes (No. A03 & No. A04) with your hands to prevent them from falling.
- Page 9 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877- 907-8669). STEP 5: Adjust the Panel Top Cover (No. C03) to the angle you feel comfortable. Attach the Bottle Holder (No.
-
Page 10: Lubricating The Treadmill
LUBRICATING THE TREADMILL IMPORTANT NOTE: You will need to lubricate your treadmill before the first use. RUNNING BELTS & TREADMILL LUBRICANT: Lubricating the Running Board (No. D11) and Running Belt (No. C25) is essential as the friction affects the life span and operations of the treadmill. Inspect the Running Belt (No. C25) and Running Board (No. -
Page 11: How To Move The Machine
HOW TO MOVE THE MACHINE Hold the treadmill at position “E” with your hand. Lift the treadmill and then you can move the treadmill to any place. - Page 12 HOW TO ADJUST THE BALANCE When the height of each pad or because of individual machine placed on the ground is not even, you need to adjust the Adjustable Knob（No. C23）to level the machine on the ground. Adjustment method: First, place the machine as shown in above, use Spanner w/ Screwdriver (No.
-
Page 13: Maintenance And Care
MAINTENANCE & CARE General cleaning will help prolong the life and improve the performance of your treadmill. Cleaning two exposed sides of the Running Belt (No. C25) will prevent dust from accumulating underneath. Keep your running shoes clean so that dirt from your shoes does not wear out the Running Board (No. -
Page 14: Important Electrical Information
IMPORTANT ELECTRICAL INFORMATION WARNING: This treadmill requires a power source of 12 amps (100-120V) in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before plugging in the equipment. Any power source above or below this level could cause significant damage to the equipment and/or user. -
Page 15: Quick Start
THE DISPLAY CONSOLE QUICK START: 1. Insert the pin end of the Safety Key (No. C21) into the Console (NO. D01). 2. Press the START button, and the system will automatically display a 3 second countdown. Once the countdown reaches zero, the Running Belt (No. C25) will start at the initial default speed of 0.6 MPH. -
Page 16: Function Keys
CALORIES/ DISTANCE: Display calories and distance, switch display every 5 seconds. Displays the number of calories burned from 0.0 to 999 KCAL and the distance traveled (0.00-99.9). When the count reaches 999 KCAL, it will reset and start back from 0. When in Countdown Mode, it will count down from the desired setting to 0. -
Page 17: App Connection
APP CONNECTION: Connect Smart Equipment to SunnyFit App: 1.Scan to download SunnyFit from the app store: 2. Ensure that the Bluetooth function is turned on from your mobile device. 3. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your free SunnyFit account and log in. -
Page 18: Self-Define Program
SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SPEED INCLINE SELF-DEFINE PROGRAM Besides 15 inner installed programs, there are 3 user self-define programs: U1, U2, U3 1.User self-define program setting: In the initial situation, press “PROG”... -
Page 19: Safety Key Function
Press SPEED +/- buttons to set F1-F4 (refer to the chart below). Press MODE button to enter the next program. Once you have finished setting F1-F4, press MODE. This will enter you into the set up for F-5 (Body Mass Index). To set F-5, grasp the Pulse Sensors located on the handles with both hands and hold them for 3 seconds. -
Page 20: Safety Note
SAFETY NOTE: We recommend that you maintain a slow speed at the beginning of a session and hold the Left & Right Handlebar Foam (No. C05 & C06) until you have become familiar with the treadmill. Insert the pin end of the Safety Key (No. C21) into the Console (No. D01) and attach the opposite end (containing the safety clip on it) to your clothing before starting your workout. -
Page 21: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SUGGESTED ACTION Not plugged in. Plug cord into outlet. Treadmill will not start Safety Key is not inserted. Insert Safety Key. Running belt tension is not Tighten the left and right adjusting Running belt not centered correct on the left or right bolts of the rear roller. - Page 22 Check motor wires to see if the motor is connected. If the wire has The motor wire is not E06/E07: Motor been punctured or damaged, you connected, or the motor is Abnormality will need to replace it. If the problem damaged.
-
Page 23: Exploded Diagram
EXPLODED DIAGRAM 1... - Page 24 EXPLODED DIAGRAM 2...
-
Page 25: Parts List
PARTS LIST Description Specification Qty. Description Specification Qty. Incline Bracket Adjustable Knob Main Frame Upright Tube Cover Left Upright Tube Running Belt Right Upright Tube Motor Belt Computer Bracket Switch Decoration Cover Panel Fixed Bracket Adjustable Knob Sleeving T-shaped Wrench Console Turning Bushing Control Board... - Page 26 Description Specification Qty. Description Specification Qty. Bolt M6*55 Big Washer Φ10*Φ26*2.0 Bolt M6*40 Big Washer Φ8*Φ22*2.0 ST2.9*8 head with Bolt M6*30 Screw washer Bolt M5*12 Locking Washer Φ10 Locking Washer Φ8 Bolt M6*15 Locking Washer Φ6 Bolt M6*8 Locking Washer Φ5 Bolt M8*25...