How To Move The Treadmill; Adjustment Guide; Adjusting The Balance - Sunny Health & Fitness PEGASUS SF-T722054 User Manual

There are two ways to move the treadmill. Please always remove the power cord from the Main
Frame (No. 1) before moving the treadmill.
1. You can move the treadmill when it is unfolded
by holding the 2 side tubes on the Main Frame
(No. 1) and lift the treadmill until the
Transportation Wheels (No. 19) touch the
ground. With the Transportation Wheels (No.
19) on the ground, you can transport the
treadmill to the desired location with ease.
2. You can move the treadmill when it is folded by
holding the Running Board (No. 18) with two
hands together, then lift the treadmill until the
Transportation Wheels (No. 19) touch the
ground. With the Transportation Wheels (No.
19) on the ground, you can transport the
treadmill to the desired location with ease.

ADJUSTING THE BALANCE

To achieve a smooth and comfortable use, you must ensure that the treadmill is stable and
secure. If you notice that the treadmill is unbalanced during use, you should adjust the
Adjustable Pads (No. 20). There are 8 Adjustable Pads (No. 20) located beneath the Main
Frame (No. 1). Simply rotate the Adjustable Pads (No. 20) until the treadmill becomes level with
the floor surface.
To do so, loosen the Flat Nut (No. 48) on the Adjustable Pads (No. 20) by turning it clockwise
(direction A). With the Flat Nut (No. 48) loosened, rotate Adjustable Pad (No. 20) until it sits
level with the surface that the treadmill is on. When you have finished adjusting the Adjustable
Pad (No. 20), re-tighten the Flat Nut (No. 48) by turning it counter-clockwise (direction B). If
necessary, repeat this process to adjust the remaining Adjustable Pads (No. 20).

HOW TO MOVE THE TREADMILL

ADJUSTMENT GUIDE

9