THE DISPLAY CONSOLE
QUICK START
1. Insert the magnet end of the safety key into the computer console.
2. Press the START button, and the system will automatically display a 3 second
countdown. Once the countdown reaches zero, the running belt will start at the initial
default speed of 0.5 MPH.
3. To adjust the speed, you can use the SPEED +/- BUTTONS or QUICK SPEED
BUTTONS 1, 3, 5 MPH.
*NOTE: The maximum speed on this treadmill is 6.0 MPH.
CONTROL FUNCTIONS
1. Press the – Speed Button to reduce the running speed.
2. Press the + Speed Button to increase the running speed.
3. Pressing a Quick Speed Button will adjust the speed to the corresponding speed
indicated (1, 3, 5 MPH).
4. Pressing the STOP Button will PAUSE the running belt and current workout data.
Pressing the STOP button again will terminate current workout session completely.
17