Summary of Contents for Sunny Health & Fitness NIMBLE SF-T722072
Page 1
NIMBLE SMART COMPACT TREADPAD TREADMILL SF-T722072 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INSTRUCTION When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. DANGER – To reduce the risk of electrical shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING –...
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.
IMPORTANT OPERATING INSTRUCTIONS 1. Insert the power plug directly into the socket. 2. Read the manual before operating the equipment. 3. Changes in speed do not occur immediately. Set your desired speed using the adjustment keys on the remote control. The speed will increase gradually. 4.
PRE-ASSEMBLY CHECK LIST Before you start to assemble, please make sure all parts are included. Description Spec. Qty. Main Frame Remote Control Power Cord Safety Key Lubricant 20ml/bottle Tablet Holder Manual Thank You Card...
Page 6
ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 1: Open the carton and remove contents. Place the Main Frame (No. A) on level ground, ensure that you have a work area that is clean and has adequate space.
Page 7
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 4: Insert the Tablet Holder (No. C) to Tablet Holder Top and Bottom Covers (No. C20 & C21).
LUBRICATING THE TREADMILL IMPORTANT NOTE: You will need to lubricate your treadmill before the first use. RUNNING BELT & TREADMILL LUBRICANT: Lubricating the Running Board (No. E21) and Running Belt (No. C07) is essential as the friction affects the life span and operations of the treadmill. Inspect the Running Belt (No. C07) and Running Board (No.
Page 9
HOW TO FOLD THE MACHINE STEP 1: Pull out the Tablet Holder (No. C) from Tablet Holder Top and Bottom Cover (No. C20 & C21). STEP 2: Loosen the 2 Screws (No. B07) of the Handlebar Tube (No. A02) counter-clockwise by using T-Shape Wrench (No.
Page 10
STEP 3: Attach the 2 Screws (No. B07) on Handlebar Tube (No. A02) to the Main Frame (No. A) clockwise by using T-Shape Wrench (No. C24). STEP 4: Insert the magnet end of Safety Key (No. E19) into the Motor Top Cover (No. C01). When you are running, you can put the wire of Safety Key (No.
HOW TO MOVE THE MACHINE Note: Please unplug the power cord from the treadmill before moving. Hold the treadmill at position as above with your hand. Lift up the treadmill and then you can move the treadmill to any place.
HOW TO USE SAFETY KEY When the handrails stand up, the treadmill is running mode. When you are running, you can put the wire of Safety Key (No. E19) through Lead Wire Buckle (No. C23) on the Handlebar Tube (No. A02) and slip to your clothes.
MAINTENANCE & CARE General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis. Clean both sides of the running belt to prevent dust from accumulating underneath the belt. Keep your running shoes clean so that dirt from your shoes does not wear out the Running Board (No.
IMPORTANT ELECTRICAL INFORMATION WARNING: This treadmill requires a power source of 8 amps (100-120V) in order to properly operate. For your safety, as well as the safety of others, verify that the power source is correct before plugging in the equipment. Any power source above or below this level could cause significant damage to the equipment and/or user.
BATTERY INSTALLATION & REPLACEMENT BATTERY INSTALLATION: 1. Remove the battery cover. 2. Take out the 1pc CR2032 battery that is included inside the remote control box. 3. Install the battery into the battery holder with the positive end facing up. 4.
THE DISPLAY CONSOLE WINDOW DISPLAY: Displays time, distance, calories, steps and speed value in turn every 5 seconds. REMOTE CONTROL FUNCTIONS: Note: If the treadmill does not respond to the remote control, you will need to resync the treadmill and remote control. To sync the remote control with the treadmill, press the start/pause button on the remote control, turn on the square switch at the same time and hold on the start/pause button for five seconds, and you will listen a “di”...
Page 17
1. START/PAUSE BUTTON: Press the START button, so that treadmill begins running. 0.5 MPH is the default start speed. During exercise, you also can press this button to pause the machine. 2. SPEED +/– BUTTONS: Press the +/- buttons to increase or decrease the speed in increments of 0.1 MPH (Miles per hour).
POWER SAVE FUNCTION: When the treadmill has been idle for 10 minutes, it will enter Power Saving Mode. While the treadmill is in this mode, the window display of the console will be turned off. To turn it back on, press any button. POWER ON: Flick the power switch to this symbol to turn on the treadmill.
EXERCISE INSTRUCTIONS GETTING STARTED: Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Be aware of your body’s signals.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SUGGESTED ACTION Not plugged in. Plug cord into outlet Treadmill will not start Safety Key not inserted. Insert Safety Key Running belt tension not Tighten the adjustment bolts Running belt not centered correct on the left or right on the left and right side of the sides of the running board.
Page 21
Check motor wires to see if the motor is connected. If the The motor wire is not wire has been punctured or ERROR: Motor connected, or the motor is damaged, you will need to abnormality damaged. replace it. If the problem is not rectified, you may need to replace the motor.
PARTS LIST Description Spec. Qty. Description Spec. Qty. Main Frame Bolt M8*15 Handlebar Tube Bolt M6*55 Running Board Bolt M6*45 Strengthen Tube Tablet Holder Base Bolt M6*46 Front Roller Bolt M6*28 Rear Roller Bolt M6*25 Magnet Bolt M5*16 Safety Key Plate Bolt M5*12 Round Magnet...
Page 24
Description Spec. Qty. Description Spec. Qty. AC Single Line L200 Blue AC Single Line Brown L200 AC Single Line AC Single Line Blue Brown L350 Green and AC Single Line Grounding Wire Brown Yellow AC Single Line L350 Blue Filter L350 AC Single Line Screw...