Table of Contents
Advertisement
Quick Links
PACER SMART COMPACT AUTO INCLINE
TREADPAD TREADMILL
SF-T722076
USER MANUAL
IMPORTANT! Please retain owner's manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE
CONTACTED US: support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).
Advertisement
Table of Contents
Related Manuals for Sunny Health & Fitness SF-T722076
Summary of Contents for Sunny Health & Fitness SF-T722076
- Page 1 PACER SMART COMPACT AUTO INCLINE TREADPAD TREADMILL SF-T722076 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. DANGER – To reduce the risk of electric shock: 1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING –... -
Page 3: Important Safety Information
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. - Page 4 IMPORTANT OPERATING INSTRUCTIONS 1. Insert the power plug directly into the socket. 2. Read the manual before operating the equipment. 3. Changes in speed do not occur immediately. Set your desired speed using the adjustment keys on the main console. The speed will increase gradually. 4.
-
Page 5: Pre-Assembly Check List
PRE-ASSEMBLY CHECK LIST Before you start to assemble, please make sure all parts are included. Description Spec. Qty. Main Frame Tablet Holder Lubricant Oil Manual THANK YOU Card Battery Foot Pad Sucker T-Shape Wrench Remote Control Safety Key Power Wire... - Page 6 ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 1: Open the carton and remove contents. Place the Main Frame (No. A) on level ground, ensure that you have a work area that is clean and has adequate space.
- Page 7 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 3: Support the Upright Tube (No. A03) with your hands to prevent them from falling. Fix the 2 Screws (No.
- Page 8 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 5: Insert the magnet end of Safety Key (No. E09) onto the Motor Top Cover (No. C01). Put the wire of Safety Key (No.
- Page 9 HOW TO ADJUST FOOT PADS When the machine is used on a smooth floor, it needs to be equipped with 2 Foot Pad Sucker (No. C12). To facilitate installation, loosen the 2 Universal Foot Pad Sets (No.C15) counter-clockwise , then put it into the 2 Foot Pad Sucker (No.
-
Page 10: Lubricating The Treadmill
LUBRICATING THE TREADMILL IMPORTANT NOTE: You will need to lubricate your treadmill before the first use. RUNNING BELT & TREADMILL LUBRICANT: Lubricating the Running Board (No. E10) and Running Belt (No. C11) is essential as the friction affects the life span and operations of the treadmill. Inspect the Running Belt (No. C11) and Running Board (No. - Page 11 HOW TO FOLD THE MACHINE STEP 1: Pull out the Tablet Holder (No. B) from Tablet Holder Bottom Cover (No. C05). STEP 2: Loosen the 2 Screws (No. B06) of the Upright Tube (No. A03) counter-clockwise by using T-Shape Wrench (No. C14). Pull the Upright Tube (No.
- Page 12 HOW TO STORE T-SHAPE WRENCH When you do not need to use the T-Shape Wrench (No. C14) , you can put this wrench into groove of the Motor Bottom Cover (No. C02).
-
Page 13: How To Move The Treadmill
HOW TO MOVE THE TREADMILL Hold the treadmill at position as above with your hand. Lift up the treadmill and then you can move the treadmill to any place. - Page 14 HOW TO ADJUST THE BALANCE When the height of each pad or because of individual machine placed on the ground is not even, you need to adjust the Universal Foot Pad Set (No. C15) to level the machine on the ground.= Adjustment method: First, place the machine as shown in above, and adjust the Universal Foot Pad Set (No.
-
Page 15: How To Use Safety Key
HOW TO USE SAFETY KEY When the handrails stand up, the treadmill is running mode. When you are running, you can put the wire of Safety Key (No. E09) through Lead Wire Buckle (No. C13) on the Upright Tube (No. A03) and slip to your clothes. -
Page 16: Maintenance And Care
MAINTENANCE & CARE General cleaning will help prolong the life and improve performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis. Cleaning two exposed sides of the Running Belt (No. C11) will prevent dust from accumulating underneath. Keep your running shoes clean so that dirt from your shoes does not wear out the Running Board (No. -
Page 17: Important Electrical Information
IMPORTANT ELECTRICAL INFORMATION WARNING: This treadmill requires a power source of 10 amps (100-120V) in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before plugging in the equipment. Any power source above or below this level could cause significant damage to the equipment and/or user. -
Page 18: The Display Console
THE DISPLAY CONSOLE WINDOW DISPLAY: Displays incline, calories, time, steps, distance and speed value in turn every 5 seconds. INCLINE ( ): Displays the incline from 0-6 level. CALORIES (CAL): Displays the number of calories burned from 0 to 99999 KCAL. When the count reaches 99999 KCAL, it will reset and start back from 0. -
Page 19: Function Keys
FUNCTION KEYS: START: To start the treadmill, insert the pin end of the Safety Key (No. E09) into the Motor Top Cover (No. C01) and then press the START button. This treadmill requires the Safety Key (No. E09) in order to start. 0.5 MPH is the default start speed. STOP/PAUSE: This button has functions of PAUSE and STOP. -
Page 20: Battery Installation And Replacement
(Miles per hour) is the default start speed. During exercise, you also can press this button to pause the machine. 2. SPEED +/– BUTTONS: Press the +/- buttons to increase or decrease the speed in increments of 0.1 MPH (Miles per hour). Pressing and holding either of these buttons for a duration of over ½ a second will increase or decrease the speed continually. - Page 21 SAFETY KEY FUNCTION: Removing the Safety Key (No. E09) from the Motor Top Cover (No. C01) while the treadmill is running will cause it to stop immediately. Once the treadmill reaches a full stop, the window display of the console will show “- - -” and the speaker will beep 3 times. To start the treadmill again, insert the pin end of the Safety Key (No.
-
Page 22: Exercise Instructions
EXERCISE INSTRUCTIONS GETTING STARTED: Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Be aware of your body’s signals. -
Page 23: Exploded Diagram
EXPLODED DIAGRAM 1... - Page 24 EXPLODED DIAGRAM 2...
-
Page 25: Parts List
PARTS LIST Description Specification Qty. Description Specification Qty. Main Frame Grating Plate Incline Frame Tablet Holder Fixed Base Upright Tube Tablet Holder Cover Running Board Strength Rod Tablet Holder Mat Tablet Holder Base Front Roller Rear Roller Motor Fixed Base Bolt M10*40 Turning Sleeve... - Page 26 Description Specification Qty. Description Specification Qty. Locking Washer Power Wire Φ5 Screw ST2.9*8 Square Switch Display Power Socket Control Board Overload Protector Communication Wire Magnet Ring Φ16*Φ28*28 Speed Wire Magnet Ring Φ25*Φ15*12 Button Board AC Signal Wire Brown 200 Button Board Top Wire AC Signal Wire Brown 350 Button Board Bottom Wire...