Table of Contents
Advertisement
QUICK START:
1. Insert the pin end of the Safety Key (No. C21) into the Console (NO. D01).
2. Press the START button, and the system will automatically display a 3 second countdown. Once
the countdown reaches zero, the Running Belt (No. C25) will start at the initial default speed of
0.6 MPH.
3. To adjust the speed, you can use the SPEED +/- buttons or QUICK SPEED buttons 3, 6 MPH.
4. To adjust the incline, you can use the INCLINE +/- buttons or QUICK INCLINE buttons 3, 6.
*NOTE: The maximum speed on this treadmill is 9.0MPH.
WINDOW DISPLAY:
SPEED/ PULSE: The speed range is 0.6-9 MPH. 0.6MPH is the default running speed.
When the runner holds both hands on the pulse sensors (located on the handles), the system will
calculate the runner's heartbeat and display it in this window. The pulse range is 50-200 beats/min.
NOTE: This data is just for reference and cannot be used for medical purposes.
INCLINE/TIME: Display incline and time, switch display every 5 seconds. When displaying incline,
the range of display is 0-12 section; When displaying time, the range of time is 0:00-99:59 MINS. If
the time reaches 99:59, the treadmill will stop smoothly and display "End" then automatically reset to
0:00 after 5 seconds. When in Countdown Mode, it will count from the setting time to 0:00. When the
clock reaches 0:00, the treadmill will stop smoothly and display "End" then automatically reset itself
after 5 seconds. Maximum Countdown time is 99:00 minutes.
THE DISPLAY CONSOLE
14
Advertisement
Table of Contents
