WAGO Kontakttechnik GmbH & Co. KG declines all liability resulting from improper action and damage to WAGO products and third party products due to non-observance of the information contained in this manual.
More information References on additional literature, manuals, data sheets and INTERNET pages 1.3 Number Notation Number Code Example Note Decimal normal notation Hexadecimal 0x64 C notation Binary '100' Within ', '0110.0100' Nibble separated with dots WAGO-I/O-SYSTEM 751 AS-Interface Components IP20...
Do not use any contact spray. The spray may impair the functioning of the contact area. The AS-Interface Slaves IP20 from the WAGO-I/O-SYSTEM 751 are open components. They must only be assembled in housings, cabinets or in electrical operation rooms. Access must only be given via a key or tool to authorized qualified personnel.
Fig. 2.1.1-1: View gq35020e 2.1.1.2 Description The AS-Interface module 751-3502 is an economical solution for a fieldbus- independent and flexible connection of actuators and sensors from the field and the control cabinet. The module is in accordance with AS-Interface specification V.3.0.
751-3502 [AS-Interface Module 4IN 24V A/B] • 9 Connectors 2.1.1.3 Connectors 2.1.1.3.1 AS-Interface Cables The connections for AS-Interface cable are 4-pole male connectors for use with female connectors from the Multi Connection System Mini. The following table shows the pin assignment of the sockets.
Fig. 2.1.1-4: Display Configuration error Error Elements gq35012x Short circuit / sensor supply blinking overload AS-Interface supply error AS-Interface green supply AS-Interface supply OK 2.1.1.5 Operating Elements The AS-Interface module 751-3502 has no operating elements. WAGO-I/O-SYSTEM 751 AS-Interface Components IP20...
12 • 751-3502 [AS-Interface Module 4IN 24V A/B] Technical Data 2.1.1.7 Technical Data Tab. 2.1.1-4: Technical Data Inputs Number of inputs Sensor supply via AS-Interface control 150 mA, short-circuit-proof voltage max. Current limitation for all inputs 150 mA tot. Rated voltage 18 V ...
Page 13
751-3502 [AS-Interface Module 4IN 24V A/B] • 13 Technical Data Tab. 2.1.1-4: Technical Data General Technical Data Operating temperature -25 °C ... +70 °C Storage temperature -25 °C ... +85 °C Relative air humidity (operation / storage) 95 % (no condensation)
The IP20 AS-Interface Slaves must only be used in enclosures, cabinets or electrical service rooms. Only authorised qualified personnel are allowed to access via key or tool. Depending on the type of slave, 3- or 4-pole WAGO female connectors of ® Series 734 (CAGE CLAMP connection) for the connection of AS-Interface, AUX, sensors or actuators are included in the delivery.