Table of Contents
Advertisement
LEDs indicate the status of inputs and outputs, the AS-Interface and actuator
supply as well as a short circuit or overload condition.
2.1.1.3 Connectors
2.1.1.3.1 AS-Interface Cable and AUX Cable
The connections for AS-Interface cable and AUX cable are 4-pole male
connectors for use with female connectors from the Multi Connection System
Mini.
The following table shows the pin assignment of the sockets.
Tab. 2.1.1-1: AS-Interface and AUX Connectors
Fig. 2.1.1-2: AS-
Interface and AUX
Connectors
Warning
Connectors must only be mated or unmated in "No Load" condition!
2.1.1.3.2 Sensor and Actuator Connectors
Sensor connections are 3-pole male connectors, actuator connections are 4-
pole male connectors, both for use with female connectors from the Multi
Connection System Mini.
The following table shows the pin assignment of the sockets.
WAGO-I/O-SYSTEM 751
AS-Interface Components IP20
X1
X1
X3
X1
X2
X4
gqxxxx7x
AS-Interface Components
Connector
Pin
---
ASI+
---
ASI-
---
X2
AUX+
---
X2
AUX-
AS-Interface Module IP20
Function
AS-Interface power supply +
AS-Interface power supply –
External power supply +
External power supply –
• 9
Advertisement
Table of Contents
