Advertisement
Available languages
Available languages
9096553
5.
Only use a cutting accessory that exceeds the No Load Speed rating
(see Specifications).
6.
Always wait until the motor has reached full speed before starting a
cut.
7.
Never install more than one cutting accessory at a time unless the
tool and cutting accessories are designed for that purpose.
8.
Avoid standing directly behind the tool
during operation to avoid potential
kickback or debris (Fig. 1).
9.
Use the correct mounting hardware. The
mounting hardware is designed to hold the
cutting accessory on the tool to allow
optimum performance and safety of
operation. Mismatched mounting
hardware may result in a tool malfunction
and cause an injury.
9.1 Only use a cutting wheel with the correct arbor size and shape
that matches the tool's spindle.
10. Check that the tool's safety guard opens and closes freely and does
not touch the cutting accessory. Check each time the safety guard
angle is adjusted, if the tool has that option. Do not operate the tool
if the guard's movement is impaired.
11. Inspect material for foreign objects such as staples, nails or debris.
Remove from material before cutting.
12. Affix the workpiece to a stable platform to prevent movement,
minimize body exposure to injury, cutting accessory binding or loss of
control.
13. Position the tool on the larger section
of a supported workpiece to complete
a cut. Cut the small portion away from
the larger portion. Support the
smaller portion if possible to prevent
it from binding when the cut is almost
complete (Fig. 2).
6
14 in. 74cc Gas Cut-Off Saw
For technical questions call 1-800-665-8685
V1.0
Fig. 1
Fig. 2
Advertisement
