Download Print this page

Stroke Oil - pro.point 9096553 Manual

Gas 14 in. 74cc cut-off saw

Advertisement

Available languages

Available languages

V1.0
3.
Do not use pre-mixed gasoline/lubricant from fuel service stations.
This includes the pre-mixed gasoline/lubricant intended for use in
mopeds, motorcycles, etc.
MIXTURE RATIO 40:1
Per Gallon
Per Quart
Per Pint
Per Litre
1.
Fill an approved container with half of the gasoline.
2.
Add the proper amount of two-stroke oil to the gasoline.
3.
Close the container and shake to mix the oil with the gasoline.
4.
Add remaining gasoline to the container, close and remix.
5.
Mix in small quantities. Do not mix more fuel than can be used in a 30
day period, 90 days if fuel stabilizer is added.
5.1 Fuel without an alcohol additive are less likely to form gum and
deposits and should not require a stabilizer.
WARNING! Do not operate the tool if any part is
missing. Replace the missing part before
operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
Numbered references in parenthesis (#1) refer to the included Parts List.
Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in an
illustration or image.
NOTICE! Do not use warped, notched, indented or
dirty flange washers.
Visit www.princessauto.com for more information
14 in. 74cc Gas Cut-Off Saw

2-STROKE OIL

3.2 oz
0.8 oz
0.4 oz
25 mL
9096553
11

Advertisement

loading