Advertisement
Available languages
Available languages
9096553
NOTICE! NEVER use a penetrating oil to lubricate
the tool. Penetrating oil may act as a solvent
that will break down the grease and cause the tool
to seize up.
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by
allowing uncontrolled discharge of waste oil.
Visit a Princess Auto Ltd. location for a solution if the tool does not
function properly or parts are missing. If unable to do so, have a qualified
technician service the tool.
PROBLEM(S)
Tool does not start
Blade rotates when
idling
Blade does not
rotate when
throttling up
22
14 in. 74cc Gas Cut-Off Saw
POSSIBLE CAUSE(S)
1.
Incorrect starting
procedure
2.
Stop switch in the
incorrect position
3.
No fuel in the tank
4.
Defective spark
plug
5.
Defective clutch
1.
Idle speed too high
2.
Defective clutch
1.
Belt loose or
defective
2.
Defective clutch
3.
Blade fitted
incorrectly
SUGGESTED SOLUTION(S)
1.
See instructions for
correct starting procedure
2.
Make sure that the stop
switch in the correct
positon
3.
Add fuel
4.
Replace
5.
Contact qualified service
technician
1.
Adjust idle speed
2.
Contact qualified service
technician
1.
Tighten or replace
2.
Contact qualified service
technician
3.
Make sure blade is
properly installed
For technical questions call 1-800-665-8685
V1.0
Advertisement
