Advertisement
Available languages
Available languages
9096553
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of work
performed.
2.
Wear the appropriate type of full-face shield in addition to safety
googles, as the work can create chips, abrasive or particulate matter.
3.
Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
3.1 Do not wear gloves when operating a tool that can snag the
material and pull the hand into the tool.
4.
Wear protective clothing designed for the work environment and
tool.
4.1 Flame retardant clothing is recommended for use with this tool.
5.
Non-skid footwear is recommended to maintain footing and balance
in the work environment.
6.
Wear steel toe footwear or steel toe caps to prevent a foot injury
from falling objects.
7.
Wear a NIOSH approved respirator when working on materials that
produce hazardous fumes, dust or particulate matter.
8.
Wear an approved hard hat or safety helmet.
WARNING! This tool produces an electromagnetic
field during operation that may interfere with
some active or passive medical implants.
Control the tool, personal movement and the work environment to avoid
personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating the tool. Proper footing and balance
enables better control in unexpected situations.
4
14 in. 74cc Gas Cut-Off Saw
For technical questions call 1-800-665-8685
V1.0
Advertisement
