Install Door Check Strap (Front) - Hudson Eight 1930 Service & Operating Manual

Remove 2 lower screws in hinge pillar trim retainer. Remove 2 screws in cowl quarter kick panel. Pull out
rear end of kick panel and remove 2 screws which hold check strap to body. Remove screws in bottom of
door window finish moulding. Remove 3 screws on top of door and 2 screws in trim panel above window.
Remove window finish moulding and header strip assembly. Remove door inside handle and regulator
handle. Remove door trim panel. Remove check strap. REPLACE check strap. Replace trim panel. Replace
handles. Replace window finish moulding and header strip assembly. Replace screws. Replace check strap
to body screws. Replace kick pad. Replace hinge pillar trim retainer.
Remarks:

INSTALL DOOR CHECK STRAP (Front)

INSTALL DOOR CHECK STRAP (Front)
ADJUSTMENTS
Suggestions: Adjust door bumpers, striker plate and dovetail glass and trim.
WWW.PlandeGraissage.ORG WWW.PlandeGraissage.ORG
PROCEDURE OF OPERATION
36
GREAT EIGHT
GREAT EIGHT
SPECIAL TOOLS
HUDSON
HUDSON