Focus Headlamps - Hudson Eight 1930 Service & Operating Manual

PROCEDURE OF OPERATION
Place car on a level floor squarely facing a smooth wall 25 feet from the headlamps. Measure height of
lamp bulbs from the floor, and draw a horizontal line on the wall at the same height. Sight through windshield
along hood and radiator emblem to determine center line of car. From this center line locate centers of lamps
and draw two vertical lines on the wall. Turn light switch lever to bright position. Cover left lamp to obscure
light beam. Turn focusing screw on rear of right headlamp until light beam has a high intensity at the top and
is as narrow as possible measured from top to bottom. Loosen headlamp bracket nut. Aim lamp so that top of
beam is just even with horizontal mark on wall and is centered with the vertical line. Tighten headlamp
bracket nut. Repeat the focusing operation with the left lamp.
Remarks:

FOCUS HEADLAMPS

FOCUS HEADLAMPS
ADJUSTMENTS
Headlamp Bulb:
Mazda No. 1110, double filament, 21 candlepower,
double contact base.
Suggestions: See the headlamp connectors make a good contact; and that wire terminals are tight
on switch.
WWW.PlandeGraissage.ORG WWW.PlandeGraissage.ORG
SPECIAL TOOLS
HE-305 Headlamp Bracket Nut Socket
Wrench
104
HUDSON
GREAT EIGHT
HUDSON
GREAT EIGHT