Install Bracket (Frame) - Hudson Eight 1930 Service & Operating Manual

Disconnect horn wire. Disconnect accelerator pedal rod. Disconnect light switch operating rod. Disconnect
drag link from pitman arm. Disconnect jacket tube bracket from. cowl bracket. Remove two bolts holding
frame bracket to frame. Remove pitman arm. Remove three steering case cover frame bracket stud nuts.
Remove frame bracket. REPLACE frame bracket. Replace steering case cover to frame bracket stud nuts.
Replace pitman -arm. Bolt frame bracket to frame. Connect cowl bracket. Align steering column. Connect
drag link. Connect light switch operating rod. Connect accelerator rod. Connect horn wire.
Remarks:

INSTALL BRACKET (FRAME)

INSTALL BRACKET (FRAME)
ADJUSTMENTS
Suggestions: Be sure that steering gear is properly aligned, and that column does not bind after case cover
to frame bracket stud nuts are tightened.
WWW.PlandeGraissage.ORG WWW.PlandeGraissage.ORG
PROCEDURE OF OPERATION
232
SPECIAL TOOLS
HE-20 Steering arm puller
HE-23 Pitman arm nut wrench
HE-299 Steering case bracket nut wrench
HUDSON
GREAT EIGHT
HUDSON
GREAT EIGHT