Install Rear Wheel Key - Hudson Eight 1930 Service & Operating Manual

Raise rear end of car. Remove rear wheel hub cap. Remove rear wheel nut cotter pin. Remove rear wheel
nut. Remove rear wheel. Remove rear wheel rim lug nuts. Remove rear tire and rim. Remove rim lug bolts.
REPLACE rear wheel. Replace rear wheel rim lug bolts. Replace rear tire and rim. Replace wheel rim lug
bolt nuts. Replace rear wheel. Replace rear wheel nut. Replace rear wheel nut cotter pin. Replace rear wheel
hub cap. Lower rear end of car.
Remarks:
INSTALL WHEEL (REAR)
INSTALL WHEEL (REAR)
ADJUSTMENTS
Axle shaft end play-.005"-.01 0"
Tire pressure—Normal, 32 lbs.;
high speed, 40 lbs.
Suggestions: Tighten axle shaft nuts securely to prevent a click in starting. Dry axle shaft buttons may
cause squeak. A small amount of grease will prevent this condition. Before installing rim, check wheel for
wobble. Use care in tightening rim, lug nuts evenly to prevent tire wobble.
WWW.PlandeGraissage.ORG WWW.PlandeGraissage.ORG
PROCEDURE OF OPERATION
279
SPECIAL TOOLS
HE-163 Axle stand
HE-113 Axle nut wrench
H-272 Hub cap wrench
h—311 Wheel puller
HUDSON
GREAT EIGHT
HUDSON
GREAT EIGHT