Raise right side of hood. Remove exhaust manifold stud nuts. Remove three bolts holding carburetor riser
to manifold. Disconnect heat control rod. Remove heat control valve. Remove bolts which secure exhaust
pipe to manifold. Remove exhaust manifold. REPLACE exhaust manifold. Replace manifold stud nuts.
Replace exhaust pipe to manifold bolts. Replace bolts holding carburetor riser to manifold. Replace heat
control valve. Connect heat control rod. Lower hood.
Remarks:
INSTALL MANIFOLD (EXHAUST)
INSTALL MANIFOLD (EXHAUST)
ADJUSTMENTS
Suggestions: Carefully examine all gaskets and replace if torn or burnt.
WWW.PlandeGraissage.ORG
WWW.PlandeGraissage.ORG
PROCEDURE OF OPERATION
99
SPECIAL TOOLS
HE-176 Universal socket wrench
E-298 Cylinder head nut wrench
HUDSON
GREAT EIGHT
HUDSON
GREAT EIGHT