Install Vacuum Tank Cover Gasket - Hudson Eight 1930 Service & Operating Manual

Disconnect gasoline line, suction line, and windshield wiper hose from vacuum tank head. Remove
screws attaching vacuum tank head to tank. Remove vacuum tank head and gasket. Lift out inner tank and
remove gasket. REPLACE gasket and inner tank. Replace gasket and vacuum tank head. Replace vacuum
tank head screws. Connect gasoline line, suction line and windshield wiper hose to vacuum tank head.
Remarks:

INSTALL VACUUM TANK COVER GASKET

INSTALL VACUUM TANK COVER GASKET
ADJUSTMENTS
Suggestions: Examine float to see that it does not leak. Be sure that flapper valve functions, and that
all pipe connections are tight.
WWW.PlandeGraissage.ORG WWW.PlandeGraissage.ORG
PROCEDURE OF OPERATION
199
GREAT EIGHT
GREAT EIGHT
SPECIAL TOOLS
HUDSON
HUDSON