Remove front bumper. Remove front spring front bolt nuts. Remove screws holding splash guard to frame.
Remove splash guard. REPLACE splash guard. Replace splash guard screws. Replace spring bolt nuts.
Remarks:
INSTALL SPLASH GUARD (RADIATOR)
INSTALL SPLASH GUARD (RADIATOR)
ADJUSTMENTS
Suggestions: Tighten screws holding splash guard very securely. Care should be taken that the splash guard
does not rub in any place causing a disagreeable sound when driving. Touch up nuts and bolt heads with air
dry enamel.
WWW.PlandeGraissage.ORG
WWW.PlandeGraissage.ORG
PROCEDURE OF OPERATION
183
GREAT EIGHT
GREAT EIGHT
SPECIAL TOOLS
HUDSON
HUDSON