Tadiran Telecom T49G User Manual page 74

User Guide for T49G IP Phone
Bandwidth or Downlink Bandwidth field respectively.
Video Enable – Enables or disables the IP phone to use camera during a call. You
can set to Enabled or Disabled. The default value is Enabled. If you set to Disabled,
the IP phone can only place/receive an audio-only call.
Auto Start Video – Enables or disables the IP phone to transmit near-site video at
once for all incoming calls. You can set to Enabled or Disabled. The default value is
Enabled.
Auto Answer Video Mute – Enables or disables the IP phone not to transmit the
video when an incoming call is automatically answered. You can set to Enabled or
Disabled. The default value is Disabled.
Uplink Bandwidth – Sets the maximum uplink bandwidth of video call. You can set
to Auto, 4000kb/s, 3000kb/s, 2000kb/s, 1500kb/s, 1280kb/s, 1024kb/s, 768kb/s, 640kb/s,
512kb/s, 384kb/s or 256kb/s. The default value is Auto.
Downlink Bandwidth – Sets the maximum downlink bandwidth of video call. You
can set to Auto, 4000kb/s, 3000kb/s, 2000kb/s, 1500kb/s, 1280kb/s, 1024kb/s, 768kb/s,
640kb/s, 512kb/s, 384kb/s or 256kb/s. The default value is Auto.
3. Tap the desired value in the pop-up dialog box.
4. Tap the Save soft key.
74