System Customizations; Headset Use; External Monitor - Tadiran Telecom T49G User Manual

User Guide for T49G IP Phone

System Customizations

Headset Use

If you want to use a wired headset, physically connect your headset and activate the
headset mode for use. For more information on physically connecting a headset, refer
to Note
Phone Installation on page 20.
If you want to use a wireless headset, activate the Bluetooth mode and then pair and
connect the Bluetooth headset with your phone. For more information on using a
Bluetooth headset, refer to
This section provides an introduction to wired headset use.
Note
There are three types of headset for SIP VP-T49 IP phones: the wired headset, EHS
headset and Bluetooth headset. You can connect up to three types of headset at once.
if you press the HEADSET key, the IP phone will use the headset according to the
And
priority: Bluetooth headset >EHS headset >wired headset.
Headset Mode Activation/Deactivation
To activate the headset mode:
1. Press
The HEADSET key LED illuminates solid green, and the icon
status bar of the touch screen when the headset mode is activated. When you tap
the line key or the Answer soft key to answer an incoming call, the call is connected
to your headset automatically. For more information on using the headset to answer
a call, refer to
With the handset on-hook, enter the desired number and tap the Send soft key, the
phone will then place a call using the headset automatically. For more information
on using the headset to place a call, refer to
To deactivate the headset mode:
1. Press
The HEADSET key LED goes out, and the icon
screen when the headset mode is deactivated.

External Monitor

During a video call, the video image captured from the camera (both near site and far
site) will be also shown on the external monitor. You can have a clearer view of the
44
Bluetooth Headset
on the phone.
Answering Calls on page 65.
again on the phone.
on page 44.
appears on the
Placing Calls on page 63.
disappears from the touch