Changing The Clarity Of Near-Site Video - Tadiran Telecom T49G User Manual

If you stop transmitting video, the icon
below:
Your camera will not transmit video to your contact and the far site cannot see you.
Stopping transmitting video does not create an audio-only call. Even if you stop
transmitting video, you can see the other party, and the call is still a video call. To place
an audio-only call, contact your system administrator.

Changing the Clarity of Near-Site Video

You can change the clarity of your video, including the sharpness, brightness and
contrast of your video stream before a video call. If your camera faces a bright light
source, such as a bright window, you may need to increase the camera's sharpness,
brightness and contrast levels so the other party can have a better video call
experience with you.
Scene Mode
T49G IP phone provides four scene modes – standard mode, warm color mode, cool
color mode and manual mode. You can select one of them to obtain a better video call
experience if required. If you select manual mode, you may need to know how to set
parameters of camera in advance (e.g., white balance, sharpness and brightness).
To configure scene mode via phone user interface:
1. Tap ->Basic->Camera Setting.
2. Tap the Scene Mode field.
will display on the near-site video, as shown
Basic Phone Features
69