Tadiran Telecom T49G User Manual page 65

To place a call using the headset:
Do one of the following:
- With the optional headset connected, press
Tap the line key to obtain a dial tone.
Enter the desired number using the keypad or the soft keyboard on the touch
screen.
Press
- With the optional headset connected, press
Enter the desired number using the keypad or the soft keyboard on the touch
screen.
Press
The T49G IP phone can handle multiple calls at a time. However, only one active call
(the call that has audio associated with it) can be in progress at any time. The T49G IP
phone can handle a maximum of 50 calls at one time.
To place multiple calls:
You can have more than one call on your T49G IP phone. To place a new call during an
active call, do one of the following:
- Tap the line key. The active call is placed on hold.
Enter the desired number using the keypad or the soft keyboard on the touch
screen.
Press
- Press
Tap the NewCall soft key.
Enter the desired number using the keypad or the soft keyboard on the touch
screen.
Press
You can tap the desired call, and then tap the Resume soft key to retrieve it.
Note
If multiple accounts are registered on the phone, you can first tap the desired line key on
the idle screen or tap the desired line from the status bar in dialing screen, and then you
can use the selected account to place a call.
or tap Send.
or tap Send.
or tap Send.
or tap the Hold soft key to place the original call on hold.
or tap Send.
Basic Phone Features
to activate the headset mode.
to activate the headset mode.
65