Tadiran Telecom T49G User Manual page 64

User Guide for T49G IP Phone
3. Press
The # key is configured as a send key by default. You can also set the * key as the send
key, or set neither.
You can also tap History or Directory to search for an entry or contact after picking up
the handset, and then tap the desired entry or contact to place a call.
Note
You can also dial using the SIP URI or IP address. To obtain the IP address of a phone, tap
->Status, when the phone is idle. The maximum SIP URI or IPv4 address length is 32
characters. For example, SIP URI: 3606@sip.com, IP: 192.168.1.15.
Your phone may not support direct IP dialing. Contact your system administrator for more
information.
To place a call using the hands-free speakerphone mode:
Do one of the following:
- With the handset on-hook, press
Enter the desired number using the keypad or the soft keyboard on the touch
screen.
Press
- With the handset on-hook, enter the desired number using the keypad or the soft
keyboard on the touch screen.
Press
64
, or tap Send.
or tap Send.
, or tap Send.
or tap the line key to obtain a dial tone.