POWER INPUT CONNECTIONS
ESWGP512-4SFP-T accepts 44-57 VDC input voltage using terminal blocks.
Figure 8. Power Input Connections
Figure 9. Console mode
NOTE:
1. The supplied RS-232 cable must be used. Straight through or cross over cable will not work.
2. If the Console screen does not appear select Enter.
1. Using a VT100 Terminal emulation program (typically HyperTerminal in Windows) open the computer COM port
connected to the switch (using supplied RS-232 cable).
2. In the HyperTerminal Port Settings window set:
18