Setting A Remote Ui Pin - Canon imageCLASS MF746Cdw User Manual

Setting a Remote UI PIN

You can set a PIN for access to the Remote UI. All users use a common PIN.
● When Department ID Management is enabled, setting here is not required.
Management(P. 365)
1
Select <Menu> in the Home screen.
2
Select <Management Settings>.
● If the login screen appears, enter the correct ID and PIN.
3
Select <License/Other>/<Remote UI Settings/Update Firmware>
Settings> <Restrict Access>.
4
Select <On>.
5
Specify the Remote UI Access PIN.
● Enter a PIN, and select <Apply>.
● The Confirm screen is displayed. Enter the PIN once again to confirm.
● You cannot register a PIN that consists only of zeros, such as "00" or "0000000."
● Do not forget your PIN. If you forget your PIN, use the procedure above to set a new PIN.
If <Management Settings> are initialized
● The Remote UI Access PIN is also initialized. After an initialization, reset the PIN.
Menu>(P. 598)
Managing the Machine
Home Screen(P. 126)
Logging in to the Machine(P. 137)
371
Setting the Department ID
<Remote UI
<Initialize
3S1Y-072