Table of Contents
Advertisement
Cannot Access Remote UI
If the message [Cannot access Remote UI.] or [Cannot continue the settings because the function to perform settings
for the device is restricted.] appears and you cannot access Remote UI, troubleshoot by checking the items below.
Set the Remote UI Access PIN.
To access the Remote UI, you must set the Remote UI Access PIN.
Administrator privileges are required to configure the setting.
[Home] screen on the operation panel
Settings/Update Firmware]
Settings]
* You cannot set a PIN consisting of all zeros, such as "00" or "0000000."
Change the System Manager PIN.
When logging in with System Manager Mode, you must change the System Manager PIN from the default
settings.
Administrator privileges are required to change the settings.
[Home] screen on the operation panel
Management]
PIN]
enter the System Manager ID
* You cannot set a System Manager ID or PIN consisting of all zeros, such as "00" or "0000000."
* Only allow certain administrators to have access to the System Manager ID and PIN after the settings are
changed.
Troubleshooting
[Menu]
[Remote UI Settings]
[On]
enter the PIN
[Menu]
[System Manager Information Settings]
[Management Settings]
[Remote UI Access Security
enter the PIN again
[Management Settings]
[System Manager ID and
enter the PIN
321
[Remote UI
[User
enter the PIN again
95LW-084
Advertisement
Table of Contents
