Table of Contents
Advertisement
l-1100.book Page 5 Friday, December 13, 2002 5:07 PM
Setting the Receive Mode
Set the machine receive mode as follows:
1. Press Receive Mode.
2. If you want to change the receive mode, press Receive Mode until
3. Press Stop to return to standby mode.
Receiving Documents and Telephone Calls Automatically:
Fax/Tel Mode
Set this mode if you want your machine to automatically switch between
voice and fax calls.
You can control precisely how your machine handles incoming calls by
adjusting the settings described below.
Setting Up Fax/Tel Mode
When you select Fax/Tel Mode from the Data Registration menu, you can
also set the following options.
❏ RING START TIME
Chapter 7
HT1-2205-000-V.1.0 LSL User's Guide
Receive Mode
❏ The LCD display shows the current receive mode setting.
the mode you want appears.
Receive Mode
Stop
When a call comes in, the machine checks to see if it is a person
wishing to speak to you or a fax machine trying to send a document.
If your machine does not have enough time to detect the fax tone, it
assumes the call is from a telephone. Use the RING START TIME
setting to increase the time the machine takes to check whether a call
is from a fax machine or a telephone. You can select a time between 0
and 30 seconds; the default is 8 seconds.
7-5
Receiving Faxes
Advertisement
Table of Contents
