Advertisement
Revision of Instruction
1995. 23, Mar.
•Revise the description on Page 34 as follows:
(Wrong)
(Correct)
(Wrong)
/TIT'
--
P
att© nTboGfatic >niof 'the Printer#;'
e*
w
'
*we^
When the printer operate with the battery pack, separate the printer from the station (complete the
reversal of the steps shown in Figure 5-8 in page 18) and install the battery pack in the printer.
When you install the battery pack in the printer, the printer BATTERY lamp lights up.
Color of BATTERY lamp
Charge level
Green
Charge level is enough.
Alternate light-up of
green and yellow
The battery pack is almost empty.
Yellow
The battery pack is empty and needs to be charged.
(Correct).
♦
Battery operation .of the Printer. ;
When the printer operate with the battery pack, separate the printer from the station (complete the
reversal of the steps shown in Figure 5-8 in page 18) and install the battery pack in the printer.
When you turn the printer power switch on, the printer BATTERY lamp lights up, and shows the status of
charge level.
When the lamp lights up in Green, Charge level is enough.
When the lamp lights up in Green and Yellow alternately, charge level becomes lower. When the printer
operates by station power, the lamp lights up in Green only and does not show the status of charge level.
•Revise the table on Page 36 as follows:
(Wrong)
(Correct)
Item
Function
Value
VD
Sets the base VD for glasses. 12.0->13.5-»13.75—15.0-^0.0
i
VD
Sets the base VD for glasses. 12.0-^ 13.5-> 13.75-» 14.0^ 15.0-^ 16.0->0.0
•Revise the description on Page 48
(Wrong ) Measurement range S+C :
C
Corneal vertex distance
(Correct) Measurement range
S+C
C
Corneal vertex distance
as follows:
-18.00 ~ +22.00D
( 0.25Dstep )
- 8.00 ~ + 8.00D
( 0.25D step )
Selectable from 12, 13.5, 13.75, 15.0, 0.0 mm
I
-18.00 ~ +22.00D
( 0.25D step, case VD=12.0 )
-8.00 ~ +8.00D
( 0.25D step, case VD=12.0 )
Selectable from 12.0,13.5, 13.75, 14.0, 15.0, 16.0, 0.0 mm
2
Advertisement
