Advertisement
(3) Printout
To print measured values, use the printer provided with Retinomax.
1) Install the print paper roll by using the procedure described in page 41
2) After measutement aim tee from o^easanng ate, (see page 7) fowam tee ligh, mceivln
1
]
window of the printer and press the L!!!!lJkev:
Figure 6-13
m
O
PIIHT
Pressing the -Ikey sends data to the printer via infrared rays and printout.
The Printer rings buzzer and is lit DATA lamp when it is received the data
ra2?o"r'''''^
The PRINT key functions as specified on the OUTPUT screen (see page 40),
I' PRINT ONLY
Prints out but does not send data.
PRINT <
■■
Sends data after printing out.
I SEND ONLY
Sends but does not print out data,
. Neither prints out nor sends data.
The Pre-setting is
"PRINT ONLY"
• Only the measured values of the last 8 measurement cycles for each eye will be printed out
• f the number of measurement cycles exceeds 8, the representative values are selected from
the measured values of the last 8 measurement cycles taken
31
Advertisement
