Advertisement
( 2 ) Fuses replacement
After turning on the power switch of the station, if
the power tamp does not tight up, it is possibte
that the fuses may have btown.
To check the fuses, first turn the unit OFF by the
power switch and disconnect the power cabie
from the watt outlet.
Press inward on the tabs on botii sides of the
fuse holder with a small flat-top screwdriver and
pull it out.
Remove the two fuses from the fuse
holder and check to see if they have blown.
If
so, replace the fuses with the recommend fuses.
Use the recommended fuses only:
Please place an order with your local Nikon distributor for spare replacement fuses.
For A.C. 100V/120V area:
Time-delay fuse 125V 2A
<i> 5.2 x 20 mm
type NAGASAWA ELECTRIC WORKS, LTD.
nSB2~
or NIPPON SEISEN
□FBT2U
For A.C. 230V area:
Time-delay fuse 250V 1A
<t> 5.2 X 20 mm
type NAGASAWA ELECTRIC WORKS, LTD.
□ES3-1000^
or HAMAI DENKYU
CTDI-IAD
(3)
Cleaning the Forehead Rest
Periodically wipe the surface of the forehead rest with a soft cloth or tissue paper moistened with lens
cleaning liquid or ethyl alcohol.
43
Advertisement
