Advertisement
9. Connection with an Externai Device
The printer has an interface connector complying with EIA RS-232C (see page 11).
This connector
can be used to send measured values to an external device such as Nikon Auto Optester.
If Retinomax is connected with the Nikon Auto Optester (such as OT-3A, OT-5A, OT-7A or OT-8A),
the objective measurement data may be automatically loaded into the Optester for a faster and more
efficient subjective examination.
For more information about the interface connection, consult with your Nikon distributor.
1 0. Using the AC-adapter (Option)
When you use AC-adapter and DC-code of option, the measuring unit drive for AC-adapter.
Nomenclature
Method
Make sure that the power switches of the measuring unit and AC-adapter is set to OFF, and set the
AC-adapter as shown in the figure 10-2.
When you use the AC-adapter, Turn the AC-adapter power switch on.
After using the AC-adapter, Turn OFF.
45
Advertisement
