Advertisement
IwyX-K-XWC*.
8. Maintenance I
•". ~~~
(1 )
Replacing a Paper Roll
® When the print paper nears the end of the roll, a red
F='
line will appear on both sides of the paper.
It is
now time to replace the paper roll.
Turn the printer upside down.
Open the paper
holder cover and pull the two paper holder knobs
outward.
l/
Figure 8-1
roll.
®
Remove the shipping tape from the new paper roll
(see Figure 8-2).
@ Pull out the paper one revolution of the roll and fold
it then (see Figure 8-3).
Gently cut the paper along the fold (see Figure 8-4).
(The purposes of this process is to avoid printing on
the remaining adhesive after the securing tape has
been removed, and to make the paper roll easier to
insert into the paper slot.)
@ Install the paper roll as shown in Figure 8-5 and
fasten into place the paper roll core with the paper
holder knobs.
lever is in the upward position.
\
-^
Figure 8-2
Figure 8-4
Figure 8-5
41
Advertisement
