VERS. 07.06.2018
2.5 Statement regarding the vibration emission
Declared value of vibration emission following EN 12096.
Machine
Measured value of vibration
Model / code
CM 450
Junior 230V
70184608625
The vibration value is lower and does not exceed 2.5 m / s.
Values determined using the procedure described in the standard EN 12418.
The measurements are made with new machines. Actual values may vary with site conditions, in
terms of:
Materials worked
Wear Machine
Lack of maintenance
Inappropriate tool for application
Tool in poor condition
Unskilled operator
Etc...
The exposure time to vibration is based on the performance of work (related to the adequacy
Machine / Tool / worked material / operator)
When evaluating risks due to hand-arm vibration, you need to take into account effective usage at
rated power of machine during a full day of work; quite often you will realise that effective utilisation
time represents around 50% of overall duration of work. You have to consider, of course, breaks,
water feeding, preparation of work, time to move the machine, disk mounting...
2
emission at m/s
<2.5
CM 450 Junior E_MAN_EN
Uncertainty K
2
m/s
0.5
Tool used
Model / code
Clipper ALFA
11