Inverter Management Through The Control Application; Connecting To The Inverter Locally Through Its Wi-Fi Network - Ingeteam INGECON SUN 3Play 160TL Installation And Operation Manual

Ingeteam

11.2. Inverter management through the control application

The control application allows the extender management of the inverter.
It is possible to access the control application from various types of device (smartphone, tablet or computer). The
inverter can be managed from the control application either locally (inverter and device connected to the same
communication network) or remotely (inverter and device connected to different communication networks).
The following sections describe the process for connecting the inverter locally or remotely.
The factory settings of the communications include:
• Ethernet interface in DHCP mode.
• Wi-Fi interface only in Access Point mode.

11.3. Connecting to the inverter locally through its Wi-Fi network

INFO
The Wi-Fi communication network generated by the inverter has a 2.4 GHz wireless frequency.
When the inverter operates in Access Point mode, it generates a Wi-Fi network. Follow the steps below to connect
locally to this Wi-Fi network generated by the inverter:
1. If the device from where the connection is made has mobile data, disable them, keeping the Wi-Fi
connection activated.
112
Screenshot of the control application
ABZ2011IQM01_H - Installation and Operation Manual
Using the unit