Change The Wi-Fi Network Password Generated By The Inverter; Connecting The Inverter To A Wi-Fi Network - Ingeteam INGECON SUN 3Play 160TL Installation And Operation Manual

Using the unit
2. With the inverter in Access Point mode, discover the Wi-Fi network generated by it. The inverter has a label
attached to it that indicates the SSID and password of the Wi-Fi network (Default local Wi-Fi access point).
3. Register in the Wi-Fi network. This network is not password-protected.
4. Open the Web browser and enter the IP address 169.254.1.1. If it is not possible to connect with this IP
address, use 192.168.10.3
5. Access it using the username and password defined on the label attached to the inverter (Default local
access login).

11.4. Change the Wi-Fi network password generated by the inverter

Ingeteam recommends that the Wi-Fi network generated by the inverter be protected with a password The
predefined password can be kept, but in order to change it, follow the steps below:
1. If the device from where the connection is made has mobile data, disable them, keeping the Wi-Fi
connection activated.
2. Access IP address 169.254.1.1 or 192.168.10.3 from the web browser.
3. In the top menu, open the Comms menu.
4. If the network is not password protected, there will be an exclamation symbol in the Wi-Fi menu. Access
this menu.
5. Click on the warning that displays in the Local AP Password option.
6. Set the desired password.
INFO
If you do not remember the password set for the Wi-Fi network generated by the inverter, contact the Ingeteam
SAT.

11.5. Connecting the inverter to a Wi-Fi network

INFO
The Wi-Fi communication network that the inverter is to be connected to must have a 2.4 GHz wireless
frequency.
Ingeteam establishes a minimum Wi-Fi signal level received by the inverter of 50% (-75 dBm) to ensure an
optimum connection.
In order to connect the inverter to a Wi-Fi network, follow the steps below:
1. If the device from where the connection is made has mobile data, disable them, keeping the Wi-Fi
connection activated.
2. Access IP address 169.254.1.1 or 192.168.10.3 from the web browser.
3. Access the Comms menu in the upper part.
4. Select Wi-Fi in the left panel.
5. In the upper part, click on Change. A list of available Wi-Fi networks will display. Select the desired
network and enter the password if requested.
ABZ2011IQM01_H - Installation and Operation Manual
Ingeteam
DE
EN
ES
FR
IT
PT
113