Table of Contents
Advertisement
ClimaCon F 316
Commissioning
6.5
App installation
The ClimaCon F app is available for both Android
and iOS.
Note the minimum requirements regarding the
version of the operating system and the
Bluetooth version (see section 3.5 on page 9).
1
Go to the Appstore for your operating system.
2
Search for the Oventrop App "ClimaCon" and install it.
10231719 000 00
7.
Commissioning
7.1
Establishment of the power supply
f
Establish the power supply.
Z
The room thermostat is now ready for operation.
Z
The display shows the currently measured
temperature. After approx. 5 seconds, the display
switches off.
7.1.1
ClimaCon F 316 - Teach-in
A ClimaCon F room thermostat corresponds to a
room in the ClimaCon app.
1
Switch on the room thermostat (position
page 9).
2
Press the "Eco mode" and "Auto mode" keys
simultaneously for approx. 3 seconds (positions
8
in Fig. 4 on page 9).
Fig. 11:
ClimaCon F - Activation of the teach-in mode
Z
The "Eco mode" and "Auto mode" key flash alternately.
The display shows "BLu".
The teach-in mode is active.
The teach-in mode remains active for approx. 1
minute. Without teach-in mode, the device
switches off and retains the previous settings.
3
Start the ClimaCon F app on your smartphone.
1
in Fig. 4 on
7
and
13
Advertisement
Table of Contents
