Table of Contents
Advertisement
ClimaCon F 316
Accessories and spare parts
4. Accessories and spare parts
You will find the current accessories and spare part list on
our website.
f
Call up the search on the website
www.oventrop.com by clicking on the magnifying
glass symbol and search for 1155536.
f
Select your product.
Z
Here you can find all information on your product.
5. Transport and storage
Parameter
Temperature range
Relative air humidity
Particles
Mechanical influences
Weather influences
Chemical
influences
10
Value
0 °C to +50 °C
Max. 95%, non-condens-
ing
Store in a dry and
dust-protected place
Protected from mechani-
cal shock
Do not store outdoors
Protect from sunlight
Do not store together with
aggressive media
6. Mounting
WARNING
Danger to life due to electric current !
There is a danger to life if live components are
touched.
!
Check that not voltage is present.
!
Secure the product against being switched on
again.
NOTICE
Damage to the ClimaCon due to unsuitable power
supply!
!
Use a SELV voltage source galvanically isolated
from the earth potential.
6.1
Tools required
•
Pen for marking the drill holes
•
Percussion drill with masonry drill bit
•
Slotted screwdriver or current tester
6.2
Loosening of the mounting plate
Fig. 5:
Loosening of the mounting plate
1
Press the release clip (Position
8) down slightly and detach the control unit from
the mounting plate.
2
Put the control unit to one side.
5
in Fig. 3 on page
10231719 000 00
Advertisement
Table of Contents
