Table of Contents
Advertisement
3.2 Accessing the System
Removing the Cover
1. Power down the system and disconnect the AC power cords from the power supplies.
2. Release the two thumb screws on the right side of the storage chassis.
3. Lift the cover up as illustrated above.
4. The cover is designed to hold itself in an open position without additional support. Note
that the cover is designed to swing open to a maximum angle of 100 degrees.
Closing the Cover
1. Gently push downward on the cover, easing it into the closed position.
2. Secure the cover with the thumb screws on the right side of the storage chassis.
Chapter 3: Maintenance and Component Installation
Thumb Screw
Thumb Screw
Figure 3-1. Removing the Cover
33
3
Advertisement
Table of Contents
