Supermicro SuperStorage Server SSG-6049P-E1CR60H User Manual page 37

CPU1: P1-DIMMC1/P1-DIMMC2/P1-DIMMB1/P1-DIMMB2/P1-DIMMA1/P1-DIMMA2/
P1-DIMMD2/P1-DIMMD1/P1-DIMME2/P1-DIMME1/P1-DIMMF2/P1-DIMMF1
2 CPUs & 20 DIMMs
CPU2: P2-DIMMB1/P2-DIMMB2/P2-DIMMA1/P2-DIMMA2/P2-DIMMD2/P2-DIMMD1/
P2-DIMME2/P2-DIMME1
CPU1: P1-DIMMC1/P1-DIMMC2/P1-DIMMB1/P1-DIMMB2/P1-DIMMA1/P1-DIMMA2/
2 CPUs & 22 DIMMs
P1-DIMMD2/P1-DIMMD1/P1-DIMME2/P1-DIMME1/P1-DIMMF1
(Unbalanced: not
CPU2: P2-DIMMC1/P2-DIMMC2/P2-DIMMB1/P2-DIMMB2/P2-DIMMA1/P2-DIMMA2/
recommended)
P2-DIMMD2/P2-DIMMD1/P2-DIMME2/P2-DIMME1/P2-DIMMF1
CPU1: P1-DIMMC1/P1-DIMMC2/P1-DIMMB1/P1-DIMMB2/P1-DIMMA1/P1-DIMMA2/
2 CPUs & 24 DIMMs P1-DIMMD2/P1-DIMMD1/P1-DIMME2/P1-DIMME1/P1-DIMMF2/P1-DIMMF1
CPU2: P2-DIMMC1/P2-DIMMC2/P2-DIMMB1/P2-DIMMB2/P2-DIMMA1/P2-DIMMA2/
P2-DIMMD2/P2-DIMMD1/P2-DIMME2/P2-DIMME1/P2-DIMMF2/P2-DIMMF1
CPU1
Notes:
•
For MM, general NM/FM ratio is between 1:4 and 1:16. Excessive capacity for FM can be
used for AD. (NM = Near Memory; FM = Far Memory).
•
For each individual population, rearrangements between channels are allowed as long
as the resulting population is compliant with the PDG rules for the 82xx/62xx/52xx/42xx
platform.
•
For each individual population, use the same DDR4 DIMM in all slots.
•
For each individual population, sockets are normally symmetric with exceptions for one
DCPMM per socket and one DCPMM per node case. Currently, DCPMM modules operate
at 2666 MHz.
•
No mixing of DCPMM and NVMDIMMs within the same platform is allowed.
•
This DCPMM population guide targets a balanced DCPMM-to-DRAM-cache ratio in MM
and MM + AD modes.
Chapter 3: Maintenance and Component Installation
Memory Population Table (cont.)
Pin 1
37
CPU2