Table of Contents
Advertisement
SuperStorage Server SSG-6049P-E1CR60H/L/L+ User's Manual
Power Supply
The SSG-6049P-E1CR60H/L/L+ features redundant 2000W Platinum Level power supplies.
These power supplies are auto-switching capable, which enables them to automatically sense
and operate at a 100V to 240V input voltage.
Redundant power supplies are hot-swappable and can be changed without powering down
the system. New units can be ordered directly from Supermicro (see contact information in
the Preface).
Changing the Power Supply
1. Remove the AC power cord from the power supply that you wish to remove from the
system.
2. Press the release tab and pull the power supply out of the chassis using the handle
provided.
3. Replace the failed power module with another of the same model.
4. Push the new power supply module into the power bay until it clicks into the locked
position.
5. Plug the AC power cord back into the new power module.
52
Advertisement
Table of Contents
