Supermicro SuperStorage Server SSG-6049P-E1CR60H User Manual page 47

Figure 3-9. Installing a Rear Hard Drive Carrier
Installing NVMe Drive Carriers into the NVMe Drive Cage
NVMe drives are hot-swappable and once the NVMe drive cage has been installed as
described, the NVMe drives can be added to or removed from the NVMe cage without
powering down the system.
1. Grasp the drive carrier handle.
2. Push the hard drive carrier into the hard drive bay until it clicks into the locked position.
Removing NVMe Drives and Carriers from the NVMe Drive Cage
1. Push the release button on the drive carrier. This will extend the drive carrier handle.
2. Grasp the drive carrier handle and pull the carrier up and out of the NVMe cage.
Figure 3-10. Logical Numbering of Hard Drives
Chapter 3: Maintenance and Component Installation
2
Drive #s 0-5 (left to right)
47
Drive #s 45-59 (left to right)
Drive #s 30-44 (left to right)
Drive #s 15-29 (left to right)
Drive #s 0-14 (left to right)