Table of Contents
Advertisement
UK
Vigtigt:
After the first 10 hours of operation, re-tension the machine. Hoses, fittings and cylinders are
inspected for any leaks and tightened.
Check regularly that all bolts are tight.
Before winter storage, the machine is washed and lubricated. After washing, the machine may be
injected into oil.
Lubricating
For lubrication, maintenance and repairs, the machine must be lowered, the tractor must be braked
and the engine must be stopped.
On the Disc-Roller XL Contour there are 25 grease nipples on the 4.5 meter and 31 grease nipples on
the 5.5 meter machine
There is 1 grease nipple on each support wheel in the hinge joint. The spindles of the support wheels
should be separated and internally lubricated once a year, (figure 1).
There is 1 grease nipple on each hinge joint of the drawbar (figure 2).
There are 2 on each hydraulic cylinder except the two disc depth adjustment cylinders, which only
have 1 grease nipple at the bushing end, (figures 3 and 4). Figure 4 is the cylinder of the wheel frame.
There is 1 grease nipple in each hinge joint on the wings, 4 pcs. in total, (Figure 3).
There is 1 grease nipple on the hinge joint of the transport wheels, (figure 5).
There is 1 grease nipple on each of the rollers' bearings, which only needs to be lubricated 1 to 2
times per season (figure 6).
Figur 1
Disc-Roller XL Contour 4.5 – 5.5m
Maintenance and service
Oil, type Hydro Texaco HD 32 has been
filled in the hydraulic system.
Figur 2
15
01-06-2023
Back to table of content
Advertisement
Table of Contents
